If you're here, it's that you're interested in or purchased our Vertical Compact Paint Rack, so let's just get into it shall we?

Here's what you get in an order:

The side currently up on all pieces is what I'll refer as the textured side. Think about it like plenty of small little holes.

Don't worry, it doesn't weaken the structure, it's just for the printing.

Step 1: The Sides

Group the sides together so the notches are all going in the same direction

Choose a pair and put the triangular notches side by side, as such:

Take both pieces of a side and align them, pressing together until it clicks.

Then, place this flat on a surface and press down on the raised part until it's flat using the bottom shelf to apply pressure evenly.

Do it for the other side and... tada!

Part 2: Slide in the Shelves

Now take the bottom shelf, texture up, and slide it in the bottom of one of the side (here I did the left side).

The bottom of the side is where you have the two little feet.

Now take the other side and slide in the other side of the bottom shelf.

All remaining shelves are the same.

Slide each one into the remaining slots in the same way as you just did. From the bottom to the top.

Part 3: The Handle

Take your handle (writing up) and slide it in the square hole on one side, then the other.

Take one of the plug (any direction) and put it in the little holes on each side of the handle. This is so you can stabilise the top and walk around with your paints.

Here's what it should look like once the plug is in.

Repeat the operation on the other side.

DONE!

You have your vertical paint rack.

Now, fill it up with your favourite paints and enjoy!

Convinced? You can buy this product now by clicking on this link.

Enjoy this product!